10.12.4 定制show命令的输出

Switch#show running-config | ?
beginBegin with the line that matches
exclude  Exclude lines that match
include  Include lines that match

Switch#show running-config |

Switch#show running-config | begin interface GigabitEthernet0/1
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
!
interface Vlan1
ip address 192.168.1.8 255.255.255.0
no ip route-cache
!
ip http server
access-list 1 permit 192.168.1.1
!
line con 0
password cisco
line vty 0 4
access-class 1 in
password cisco
login
line vty 5 15
login
!
!
end

Switch#show running-config | exclude interface
Building configuration...

Current configuration : 1029 bytes
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Switch
!
enable secret 5 $1$sUVW$pmbgIVKXgF4cOGTpHxCuA1
enable password 3com
!
ip subnet-zero
!
ip ssh time-out 120
ip ssh authentication-retries 3
!
spanning-tree mode pvst
no spanning-tree optimize bpdu transmission
spanning-tree extend system-id
!
!
!
ip address 192.168.1.8 255.255.255.0
no ip route-cache
!
ip http server
access-list 1 permit 192.168.1.1
!
line con 0
password cisco
line vty 0 4
access-class 1 in
password cisco
login
line vty 5 15
login
!
!
end

Switch#show interface | include protocol
Vlan1 is up, line protocol is up
FastEthernet0/1 is down, line protocol is down (notconnect)
FastEthernet0/2 is up, line protocol is up (connected)
FastEthernet0/3 is down, line protocol is down (notconnect)
FastEthernet0/4 is down, line protocol is down (notconnect)
FastEthernet0/5 is down, line protocol is down (notconnect)
FastEthernet0/6 is down, line protocol is down (notconnect)
FastEthernet0/7 is down, line protocol is down (notconnect)
FastEthernet0/8 is down, line protocol is down (notconnect)
FastEthernet0/9 is down, line protocol is down (notconnect)
FastEthernet0/10 is down, line protocol is down (notconnect)
FastEthernet0/11 is down, line protocol is down (notconnect)
FastEthernet0/12 is down, line protocol is down (notconnect)
GigabitEthernet0/1 is down, line protocol is down (notconnect)
GigabitEthernet0/2 is down, line protocol is down (notconnect)
Switch#